|
_IsClosed
|
Indicates whether a LinearElement is closed.
(Inherited from LinearElement) |
|
Accept
|
Accepts this element
(Overrides Spiral.Accept(LinearElementVisitor)) |
|
BackProjectPointOnPerpendicular
|
(Inherited from LinearElement) |
|
CalculateAllProjectionPointsRange2d(DPoint3d,
Nullable(Double), Nullable(Double), Boolean,
Nullable(Double))
|
Calcuklates all projection of point within a range.
(Inherited from LinearElement) |
|
CalculateAllProjectionPointsRange2d(DPoint3d,
Nullable(Double), Nullable(Double), Boolean, Boolean,
Nullable(Double))
|
Calcuklates nearst projection of point within a range.
(Inherited from LinearElement) |
|
CalculateAllSkewPoints2d
|
Calcuklates all skew points
(Inherited from LinearElement) |
|
CalculateAllTangentPoints2d
|
Calcuklates all tangennt points
(Inherited from LinearElement) |
|
CalculateNearestProjection2d
|
Calcuklates nearst projection of point.
(Inherited from LinearElement) |
|
CalculateNearestProjectionRange2d(DPoint3d,
Nullable(Double), Nullable(Double), Boolean,
Nullable(Double))
|
Calcuklates nearest projection of point within a range.
(Inherited from LinearElement) |
|
CalculateNearestProjectionRange2d(DPoint3d,
Nullable(Double), Nullable(Double), Boolean, Boolean, Boolean,
Nullable(Double))
|
Calcuklates nearest projection of point within a range.
(Inherited from LinearElement) |
|
Clip
|
Clips the LinearElement and returns the result.
(Inherited from LinearElement) |
|
Clone
|
(Inherited from LinearElement) |
|
CloneInternal
|
Creates a copy of this instance
(Overrides Spiral.CloneInternal()) |
|
ComputeClosestIntersWithInfiniteLine
|
Computes intersection with an infinite line which is closest to
the origin.
(Inherited from LinearElement) |
|
Dispose()
|
(Inherited from LinearElement) |
|
Dispose(Boolean)
|
(Inherited from LinearElement) |
|
DropLineStrings
|
(Inherited from LinearElement) |
|
Dump()
|
Dumps the element information.
(Inherited from LinearElement) |
|
Dump(StringWriter)
|
Dumps the geometry for debug purpose.
(Inherited from LinearElement) |
|
Equals(Object)
|
Indicates whether otherObject is a LinearElement and is
identical to this LinearElement.
(Inherited from LinearElement) |
|
Equals(Object,
Double)
|
Indicates whether otherObject is a LinearElement and is nearly
identical to this LinearElement. This is to use in unit tests only
to compare with baselines stored in XML for example. Never use this
method in application code.
(Inherited from LinearElement) |
|
ExtendBeginByLineOrTrim(Double)
|
Returns extended by line or trimmed element from its start
point
(Inherited from LinearElement) |
|
ExtendBeginByLineOrTrim(Double,
Double)
|
Returns extended by line or trimmed element from its start
point
(Inherited from LinearElement) |
|
ExtendEndByLineOrTrim(Double)
|
Returns extended by line or trimmed element from its end
point
(Inherited from LinearElement) |
|
ExtendEndByLineOrTrim(Double,
Double)
|
Returns extended by line or trimmed element from its end
point
(Inherited from LinearElement) |
|
ExtendOrTrimBegin(Double)
|
Returns extended or trimmed element from its start point
(Inherited from LinearElement) |
|
ExtendOrTrimBegin(Double,
Double)
|
Returns extended or trimmed element from its start point
(Inherited from LinearElement) |
|
ExtendOrTrimBeginByParameter
|
Returns extended or trimmed element from its start point
(Inherited from LinearElement) |
|
ExtendOrTrimBeginByPoint(DPoint3d)
|
Returns extended or trimmed element by its start point.
(Inherited from LinearElement) |
|
ExtendOrTrimBeginByPoint(DPoint3d,
Double)
|
Returns extended or trimmed element by its start point.
(Inherited from LinearElement) |
|
ExtendOrTrimEnd(Double)
|
Returns extended or trimmed element from its end point
(Inherited from LinearElement) |
|
ExtendOrTrimEnd(Double,
Double)
|
Returns extended or trimmed element from its end point
(Inherited from LinearElement) |
|
ExtendOrTrimEndByParameter
|
Returns extended or trimmed element from its end point
(Inherited from LinearElement) |
|
ExtendOrTrimEndByPoint(DPoint3d)
|
Returns extended or trimmed element by its end point.
(Inherited from LinearElement) |
|
ExtendOrTrimEndByPoint(DPoint3d,
Double)
|
Returns extended or trimmed element by its end point.
(Inherited from LinearElement) |
|
Finalize
|
(Inherited from LinearElement) |
|
GetAsProfiledElement
|
Get the linear element as a profiled element
(Inherited from LinearElement) |
|
getBcLinearEl
|
(Inherited from Spiral) |
|
GetCentroid
|
Get the centroid of a linear element;
(Inherited from LinearElement) |
|
GetChordDistanceFromDistanceAlong(Double)
|
Gets Chord distance that corresponds to a given distance along
the element
(Inherited from LinearElement) |
|
GetChordDistanceFromDistanceAlong(Double,
Double)
|
Gets Chord distance that corresponds to a given distance along
the element
(Inherited from LinearElement) |
|
GetChordDistanceFromParameter(Double)
|
Gets chord distance that corresponds to a given parameter along
the element
(Inherited from LinearElement) |
|
GetChordDistanceFromParameter(Double,
Double)
|
Gets chord distance that corresponds to a given parameter along
the element
(Inherited from LinearElement) |
|
GetClothoidClone
|
(Inherited from Spiral) |
|
GetCurvatureAtParameter
|
Gets curvature at a given parameter on linear element.
(Inherited from LinearElement) |
|
GetCurveVector
|
(Inherited from LinearElement) |
|
GetDistanceAlongFromChordDistance(Double)
|
Gets distance along that corresponds to a given chord distance
along the element
(Inherited from LinearElement) |
|
GetDistanceAlongFromChordDistance(Double,
Double)
|
Gets distance along that corresponds to a given chord distance
along the element
(Inherited from LinearElement) |
|
GetDistanceAlongMatches
|
Gets the correspondances between distance along on this element
and the other element.
(Inherited from LinearElement) |
|
GetDistanceFromParameter
|
Gets distance that corresponds to a given parameter along the
element.
(Inherited from LinearElement) |
|
GetExtendedElement
|
Get the element extended with lines of the given length.
(Inherited from LinearElement) |
|
GetFirstDerivativeAtParameter
|
Gets the first derivate at a given parameter on linear
element.
(Inherited from LinearElement) |
|
GetHorizontalControlPoints(HorizontalControlPointTypes)
|
Get horizontal control points from this linearelement. The
resulting collection contains the control points merged with points
of the linearPoints arguments.
(Inherited from LinearElement) |
|
GetHorizontalControlPoints(HorizontalControlPointTypes,
LinearPointCollection)
|
Get horizontal control points from this linearelement. The
resulting collection contains the the control points merged with
points of the linearPoints arguments.
(Inherited from LinearElement) |
|
GetLength
|
Gets 2D length of linear element
(Inherited from LinearElement) |
|
GetLinearPointCollectionBySelection
|
Ported from Bentley.CifNET.GeometryModel (src.cs)
(Inherited from LinearElement) |
|
GetLinearPointCollectionFromLineString
|
Ported from Bentley.CifNET.GeometryModel (src.cs)
(Inherited from LinearElement) |
|
GetLocalCoordinatesAtParameter
|
Get the coordinates at defined parameter along clothoid
spiral |
|
GetNativeElement
|
Gets the native element embedded into the managed
LinearElement.
(Inherited from LinearElement) |
|
GetOffsetElement(Double)
|
Returns offset element
(Inherited from LinearElement) |
|
GetOffsetElement(Double,
Double)
|
Returns offset element
(Inherited from LinearElement) |
|
GetOffsetPoint
|
Gets a point at parameter offset.
(Inherited from LinearElement) |
|
GetPartialByDistances(Double,
Double)
|
Returns a partial element from start distance to end
distance
(Inherited from LinearElement) |
|
GetPartialByDistances(Double,
Double, Boolean)
|
Returns a partial element from start distance to end
distance
(Inherited from LinearElement) |
|
GetPartialByDistances(Double,
Double, Double)
|
Returns a partial element from start distance to end
distance
(Inherited from LinearElement) |
|
GetPartialByParameters
|
Returns a partial element from start parameter to end
parameter
(Inherited from LinearElement) |
|
GetPartialByPoints
|
Gets partial between two points. Points can be null, meaning
that it starts on beginning or end.
(Inherited from LinearElement) |
|
GetPointAtDistanceOffset(Double,
Double)
|
Gets point at given distance/offset from linear element.
(Inherited from LinearElement) |
|
GetPointAtDistanceOffset(Double,
Double, Double)
|
Gets point at given distance/offset from linear element.
(Inherited from LinearElement) |
|
GetPointAtParameterOffset
|
Gets point at given parameter and offset on linear element.
(Inherited from LinearElement) |
|
GetPositionMatches
|
Gets the correspondances between psition on this element and
the other element.
(Inherited from LinearElement) |
|
GetSecondDerivativeAtParameter
|
Gets the second derivate at a given parameter on linear
element.
(Inherited from LinearElement) |
|
GetSpiralClone
|
(Inherited from Spiral) |
|
GetThirdDerivativeAtParameter
|
Gets the third derivate at a given parameter on linear
element.
(Inherited from LinearElement) |
|
GetVariableOffsetElement(Double,
Double)
|
Returns offset element with variable offset
(Inherited from LinearElement) |
|
GetVariableOffsetElement(Double,
Double, Double)
|
Returns offset element with variable offset
(Inherited from LinearElement) |
|
GetVariableOffsetElement(Double,
Double, Double, Double)
|
Returns offset element with variable offset
(Inherited from LinearElement) |
|
GetVerticalControlPoints(VerticalControlPointTypes)
|
Get vertical control points from this linearelement. The
resulting collection contains the control points merged with points
of the linearPoints arguments.
(Inherited from LinearElement) |
|
GetVerticalControlPoints(VerticalControlPointTypes,
LinearPointCollection)
|
Get vertical control points from this linearelement. The
resulting collection contains the the control points merged with
points of the linearPoints arguments.
(Inherited from LinearElement) |
|
InitializeGEOPAKClothoid
|
Initializes with GEOPAK parameters
(Inherited from Spiral) |
|
Intersect(LinearElement)
|
Gets collection of intersections with another linear
element.
(Inherited from LinearElement) |
|
Intersect(DPoint3d,
DVector3d)
|
Gets collection of intersections with an infinite vector
starting at origin.
(Inherited from LinearElement) |
|
Intersect(LinearElement,
Double)
|
Gets collection of intersections with another linear
element
(Inherited from LinearElement) |
|
Intersect(DPoint3d,
DVector3d, Double)
|
Gets collection of intersections with an infinite vector
starting at origin.
(Inherited from LinearElement) |
|
IsProfiledElement
|
Tells if LinearElement is a Profiled Element.
(Inherited from LinearElement) |
|
Make
|
|
|
MirroxX
|
Mirrors the element on X axis.
(Inherited from LinearElement) |
|
ProjectPointOnPerpendicular(DPoint3d)
|
Projects a point onto an element perpendicularly. Gets the
closest projection.
(Inherited from LinearElement) |
|
ProjectPointOnPerpendicular(DPoint3d,
Double)
|
Projects a point onto an element perpendicularly. Gets the
closest projection.
(Inherited from LinearElement) |
|
ProjectPointOnPerpendicularAll(DPoint3d)
|
Projects a point onto an element perpendicularly. Gets all the
projections.
(Inherited from LinearElement) |
|
ProjectPointOnPerpendicularAll(DPoint3d,
Double)
|
Projects a point onto an element perpendicularly. Gets all the
projections.
(Inherited from LinearElement) |
|
ProjectPointOnSkew(DPoint3d,
Double, Double)
|
Projects a point onto an element with a skewed angle. Gets the
closest projection only.
(Inherited from LinearElement) |
|
ProjectPointOnSkew(DPoint3d,
Double, Double, Double)
|
Projects a point onto an element with a skewed angle. Gets the
closest projection only.
(Inherited from LinearElement) |
|
ProjectPointOnSkewAll(DPoint3d,
Double, Double)
|
Projects a point onto an element with a skewed angle. Gets all
the projection.
(Inherited from LinearElement) |
|
ProjectPointOnSkewAll(DPoint3d,
Double, Double, Double)
|
Projects a point onto an element with a skewed angle. Gets all
the projection.
(Inherited from LinearElement) |
|
ProjectPointOnTangent(DPoint3d)
|
Projects a point onto an element tangentially. Gets only the
closest projection.
(Inherited from LinearElement) |
|
ProjectPointOnTangent(DPoint3d,
Double)
|
Projects a point onto an element tangentially. Gets only the
closest projection.
(Inherited from LinearElement) |
|
ProjectPointOnTangentAll(DPoint3d)
|
Projects a point onto an element tangentially. Gets all the
projections.
(Inherited from LinearElement) |
|
ProjectPointOnTangentAll(DPoint3d,
Double)
|
Projects a point onto an element tangentially. Gets all the
projections.
(Inherited from LinearElement) |
|
Reverse
|
Reverses a clothoid spiral
(Overrides Spiral.Reverse()) |
|
RotateToDirection
|
Rotates the element around the center by a given angle.
(Inherited from LinearElement) |
|
RotateToThruPoint
|
Rotates the element around the center and so that it passes
thru the point.
(Inherited from LinearElement) |
|
SetBcLinearEl(IBcLinearEl*)
|
(Inherited from LinearElement) |
|
SetBcLinearEl(IBcLinearEl*)
|
(Inherited from LinearElement) |
|
ShallowCopy
|
Used to create a Shalow copy of this element.
(Inherited from LinearElement) |
|
StrokeByChord(Double)
|
Strokes element by chord
(Inherited from LinearElement) |
|
StrokeByChord(Double,
LinearPointCollection)
|
Strokes element by chord.
(Inherited from LinearElement) |
|
StrokeByChord(Double,
Double)
|
Strokes element by chord
(Inherited from LinearElement) |
|
StrokeByConnectionPoints(ConnectionPointTypes)
|
Strokes the complex element by its control points. The
resulting collection contains the connection points merged with
points of the linearPoints arguments.
(Inherited from LinearElement) |
|
StrokeByConnectionPoints(ConnectionPointTypes,
LinearPointCollection)
|
Strokes the complex element by its control points. The
resulting collection contains the the connection points merged with
points of the linearPoints arguments.
(Inherited from LinearElement) |
|
StrokeByDistances(Double[])
|
Strokes the linear element by distance.
(Inherited from LinearElement) |
|
StrokeByDistances(Double[],
LinearPointCollection)
|
Strokes the linear element by distance.
(Inherited from LinearElement) |
|
StrokeByDistances(Double[],
Double)
|
Strokes the linear element by distance.
(Inherited from LinearElement) |
|
StrokeByDivisor(Int32)
|
Strokes linear element by divisor.
(Inherited from LinearElement) |
|
StrokeByDivisor(Int32,
Double)
|
Strokes linear element by divisor.
(Inherited from LinearElement) |
|
StrokeByEndPoints()
|
Strokes element by end points.
(Inherited from LinearElement) |
|
StrokeByEndPoints(Double)
|
Strokes element by end points.
(Inherited from LinearElement) |
|
StrokeByEndPoints(LinearPointCollection)
|
Strokes element by end points.
(Inherited from LinearElement) |
|
StrokeByStep(Double,
StrokingByStepMethod)
|
Strokes linear element by step.
(Inherited from LinearElement) |
|
StrokeByStep(Double,
StrokingByStepMethod, LinearPointCollection)
|
Strokes linear element by step.
(Inherited from LinearElement) |
|
StrokeByStep(Double,
StrokingByStepMethod, Double)
|
Strokes linear element by step.
(Inherited from LinearElement) |
|
Transform
|
Transforms an element and return the transformed element.
(Inherited from LinearElement) |
|
TranslateToThruPoint
|
Transalets the element on a given direction so that it passes
thru a point.
(Inherited from LinearElement) |
